English Deutsch

EASY-ROTOR-CONTROL

 

ERC-products are available at our two distributors

       
FOR THE US AND CANADA                                    FOR ANYWHERE ELSE

 

EASY-ROTOR-CONTROL (ERC, ERC-Mini, ERC-M)

ERC are RS232-, USB or LAN-interfaces for almost any rotator in the world.

ERC are available as 1-axis-interface for Azimuth and as 2-axis-interface for Azimuth&Elevation or DUAL-Azimuth.

ERC support the control of (most) any rotator by a standard RS232-, USB- or LAN-interface.

ERC might be installed directly into the rotor-controllers housing or in an external housing.

ERC are suitable to upgrade rotor-controllers which cannot be controlled by computers yet.

ERC can be used by many professional HAM-radio programs as they understand protocols like HyGain DCU-1 or Yaesu GS232.

ERC provide a software-driven calibration-process without putting jumpers, measuring or adjusting feedback-voltages.

ERC provide easy installation into the rotor-controllers housing or into external housings.

ERC come with a detailed installation-guide.

ERC have a bootloader which enables the user to update the controller-firmware by the RS-232- or USB-interface.

ERC support a comprehensive set of configuration-items.

 

Before ordering an ERC:

Please check our Rotator-list in order to be sure, that your rotator is compatible to our interfaces and if there is any accessory (connector or rotor-card) needed in order to set your system up.

The interface selection-guide will also help you in the decision, what interface to buy.

Please check also our Software-Guide in order to be sure that your favourite program is compatible to our interfaces and how to set it up.


Product-overview

 

Azimuth-interface ERC-Mini

  ERC-Mini DX ERC-Mini SDX
     
Delivery form ready assembled and tested
in aluminium enclosure
ready assembled and tested
Protocols DCU-1, GS232A, GS232B DCU-1, GS232A, GS232B
Output 3x opencollector
4-stage DAC speed-control
3x opencollector
4-stage DAC speed-control
Interface USB (FTDI) USB (FTDI)
Supply USB USB
Included Aluminium enclosure
USB-cable
Mini-DIN6-cable
USB-cable
Mounting material
Rotators all Yaesu DXA and DXC all Yaesu / Kenpro SDX

 

Universal Azimuth-interface ERC Version 4 

  ERC Version 4 USB ERC Version 4 RS232 ERC Version 4 SMD USB
   ERC VERSION 4, USB Bausatz  ERC VERSION 4, RS232 Bausatz  ERC VERSION 4 SMD, USB bestückt und getestet
Delivery form Kit Kit ready assembled and tested
Protocols DCU-1, GS232A, GS232B DCU-1, GS232A, GS232B DCU-1, GS232A, GS232B
Output 2xDPDT, 1xSPST through
terminal-blocks
2xDPDT, 1xSPST through
terminal-blocks
2xDPDT, 1xSPST through
terminal-blocks
Interface USB (FTDI) RS232c USB (FTDI)
Supply DC 11..15V DC 11..15V USB 
Included mounting material
USB-cable
DC-connector
wires and cable ties
mounting material
RS232-cable
DC-connector
wires and cable ties
mounting material
USB-cable
wires and cable ties
Optional connectors and cables to rotator control-box connectors and cables to rotator control-box connectors and cables to rotator control-box
Rotators all rotators from Azimuth-rotator-list  for ERC V4 all rotators from Azimuth-rotator-list for ERC V4 all rotators from Azimuth-rotator-list for ERC V4

 

 Universal Azimuth/Elevation-interface ERC-M 

  ERC-M USB ERC-M RS232 ERC-M SMD
   ERC-M USB Bausatz  ERC-M RS232 Bausatz  ERC-M SMD bestückt und getestet
Delivery form Kit Kit ready assembled and tested
Protocols DCU-1, GS232A, GS232B,
Dual AZ
DCU-1, GS232A, GS232B,
Dual AZ
DCU-1, GS232A, GS232B,
Dual AZ
Output 6x opencollector
through D-SUB15
6x opencollector
through D-SUB15
6x opencollector
through D-SUB15
Interface USB (FTDI) RS232c USB (FTDI) and RS232c
Supply USB or DC 12..14V DC 12..14V USB or DC 12..14V
Included USB-cable
DC-connector
D-SUB15 connector
RS232-cable
DC-connector
D-SUB15 connector
USB-cable
RS232-cable
DC-connector
D-SUB15 connector
Optional Slimline-case
Desktop-housing
Rotorcards
LAN-interface
connectors and cables to rotator control-box
Slimline-case
Desktop-housing
Rotorcards
LAN-interface
connectors and cables to rotator control-box
Slimline-case
Desktop-housing
Rotorcards
LAN-interface
connectors and cables to rotator control-box
Rotators all rotators from Rotator-list  for ERC-M all rotators from Rotator-list  for ERC-M all rotators from Rotator-list  for ERC-M

 

Read what the users and the press says

 


Show 1 to 8 (of in total 8 products) Sites:  1 
ERC-Mini SDX

ERC-Mini SDX

Interface for Yaesu/Kenpro SDX-series, USB, open-collector-outputs, 4-stage speed-control

ERC-Mini SDX can be used to control rotators of the SDX-series by Yaesu/Kenpro. The interface was checked with the most popular logging-, contesting and remote-programs.
You can use ERC-Mini SDX to directly mount it inside the SDX-control-box
.

89,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: only available at distribution

 Details

ERC-Mini DX

ERC-Mini DX

Interface for Yaesu DXA/DXC-series, USB, open-collector-outputs, 4-stage speed-control

ERC-Mini DX can be used to control rotators of the DXA/DXC-series by Yaesu. The interface was checked with the most popular logging-, contesting and remote-programs.
You can use ERC-Mini DX to directly connect it to the DXA/DXC-control-box
with a Mini-DIN-cable.

99,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: only available at distribution

 Details

ERC VERSION 4, RS232 Kit

ERC VERSION 4, RS232 Kit

1-axis interface for azimuth, RS232, relay-outputs

ERC is a compact interface which can be mounted directly into the control-box of most any rotator as it has the needed relays already on-board.

ERC can be used to control directional antennas for the HAM-operator. The controller has been checked with the most popular logging and contest-programs. Please refer to our software-guide.

 

69,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: only available at distribution

 Details

ERC VERSION 4, USB Kit

ERC VERSION 4, USB Kit

1-axis interface for azimuth, USB, relay-outputs

ERC is a compact interface which can be mounted directly into the control-box of most any rotator as it has the needed relays already on-board.

ERC can be used to control directional antennas for the HAM-operator. The controller has been checked with the most popular logging and contest-programs. Please refer to our software-guide.

79,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: only available at distribution

 Details

ERC VERSION 4 SMD, USB assembled and tested

ERC VERSION 4 SMD, USB assembled and tested

1-axis interface for azimuth, USB, relay-outputs

ERC is a compact interface which can be mounted directly into the control-box of most any rotator as it has the needed relays already on-board.

ERC can be used to control directional antennas for the HAM-operator. The controller has been checked with the most popular logging and contest-programs. Please refer to our software-guide.

104,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: only available at distribution

 Details

ERC-M RS232 Kit

ERC-M RS232 Kit

1- or 2-axis interface, RS232, open-collector-outputs, Azimuth, Azimuth&Elevation, DUAL-Azimuth

ERC-M can be used to control azimuth, azimuth&elevation or DUAL-azimuth antenna-systems for the HAM-operator. The controller was checked with the most popular logging or tracking-programs or with rotor-control-programs who communicate with such applications by DDE.
You can use ERC-M to directly connect the control-boxes that have a remote-connector or to (most) any other rotators (including homebrew-systems) by use of rotorcards
. Any combination of rotators is valid.

54,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: only available at distribution

 Details

ERC-M USB Kit

ERC-M USB Kit

1- or 2-axis interface, USB, open-collector-outputs, Azimuth, Azimuth&Elevation, DUAL-Azimuth

ERC-M can be used to control azimuth, azimuth&elevation or DUAL-azimuth antenna-systems for the HAM-operator. The controller was checked with the most popular logging or tracking-programs or with rotor-control-programs who communicate with such applications by DDE.
You can use ERC-M to directly connect the control-boxes that have a remote-connector or to (most) any other rotators (including homebrew-systems) by use of rotorcards
. Any combination of rotators is valid.

64,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: only available at distribution

 Details

ERC-M SMD assembled and tested

ERC-M SMD assembled and tested

1- or 2-axis interface, USB and RS232, open-collector-outputs, Azimuth, Azimuth&Elevation, DUAL-Azimuth

ERC-M can be used to control azimuth, azimuth&elevation or DUAL-azimuth antenna-systems for the HAM-operator. The controller was checked with the most popular logging or tracking-programs or with rotor-control-programs who communicate with such applications by DDE.
You can use ERC-M to directly connect the control-boxes that have a remote-connector or to (most) any other rotators (including homebrew-systems) by use of rotorcards
. Any combination of rotators is valid.

99,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: only available at distribution

 Details

Show 1 to 8 (of in total 8 products) Sites:  1 

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Customer group


Customer group: Guest

Parse Time: 0.285s